|
TEC®
Glue Guns
Industrial Supply Group is a Full Line
Distributor! |
 |
|
GAS-TEC100
|
|
 |
The GAS-TEC100 is
a mini, cordless glue gun that runs on butane
gas. It does not require mains electricity
or batteries but is quickly refilled from
readily available standard cigarette lighter
canisters. Refilling takes less than 10
seconds and will run for up to 2 hours.
The gun is switched on using the combined gas
valve and piezo ignition button. Once
started, the tool takes only 5 minutes to reach
operating temperature.
The GAS-TEC 100 has been designed and built
under ISO9001 quality control and complies with
European safety requirements. It comes
with full operating instructions and a one year
guarantee. |
|
Product |
Brochure |
Details & Price |
|
TEC-0100 |
PDF Brochure |
 |
|
|
|
HOBBY-TEC150
|
|
 |
The
HOBBY-TEC 150 lightweight, professional
glue gun has been specifically designed
for hobby-craft use and offers
unrivalled reliability, ease of use, and
exceptional adhesive melt rate for a
glue gun of this size.
An efficient melt chamber reduces effort
required to extrude adhesive and
minimizes fatigue. The thin profile of
the tool provides excellent visibility
and helps to ensure correct positioning
and quantity of adhesive every time.
It lends itself to applications where
small quantities of adhesive are
required repetitively, making it ideal
for hobby-craft applications as well as
general use. |
|
Product |
Brochure |
Details & Price |
|
TEC-0150 |
PDF Brochure |
|
|
|
|
TEC-250
|
|
 |
The TEC
250 lightweight, professional glue gun
offers unrivalled reliability, ease of
use and exceptional adhesive melt rate
for a tool of this size. A high quality,
self-regulating heater controls the glue
gun temperature, and is designed to
provide years of trouble-free service.
The TEC 250 glue gun is
designed to be comfortable and easy to use, with it's narrow
profile handle and full-hand lever trigger, it is the ideal
gun for all hand sizes.
It lends itself ideally to
applications where small quantities of adhesive are required
in product assembly, packaging and general use. Also
suitable for schools, colleges and outworkers, where a safe
reliable gun is essential. |
|
Product |
Brochure |
Details & Price |
|
TEC-0250 |
PDF Brochure |
|
|
|
|
TEC-700 |
|
 |
The TEC 700 has been designed
and built with reliability and performance in mind.
Simple yet robust, it has a highly efficient melt chamber
with a powerful 300W stainless steel cartridge heater
ensuring an impressive output of up to 2 kilos of molten
adhesive an hour.
Designed for continuous
operation, the TEC 700 is safe, comfortable and easy to use,
and is the ideal tool for heavy duty use. |
|
Product |
Brochure |
Details & Price |
|
TEC-0700 |
PDF Brochure |
|
|
|
|
TEC-901 |
|
 |
The TEC
901 is built to the same high standards
as the TEC 700, but has the added
advantage of adjustable temperature
control. This means that by simply
fitting another temperature module, the
gun is capable of using all types of
hotmelt adhesives, including lowmelt,
standard EVA and high temperature
polyamides.
The electronic circuit board in the
TEC 901 precisely controls the operating temperature, increasing
output of molten glue to 2.4 kg/hr and ensuring consistent bonding. |
|
Product |
Brochure |
Details & Price |
|
TEC-0901 |
PDF Brochure |
|
|
|
|
TEC-3200
|
|
 |
The TEC
3200 high output glue gun is electronic
technology at its best, making it the
ideal tool for product assembly,
packaging, sealing, electrical potting
and encapsulating. Instant bonding of
virtually any material ensures fast,
efficient, cost effective production.
The high efficiency heater housing,
coupled with a solid state adjustable temperature controller,
guarantees adhesive at the right temperature just when you need it.
The TEC 3200 loaded with two
TECBOND 43mm cartridges can never run out of adhesive, as a
cartridge always remains in the glue gun at the right temperature. |
|
Product |
Brochure |
Details & Price |
|
TEC-3200 |
PDF Brochure |
|
|
|
|
TEC-6100 |
|
|
|
The TEC 6100 is probably the world’s
most powerful demand hotmelt glue gun. The highly efficient
heater housing and 500 watt power make it ideal for the most
demanding applications. Made to a very high standard it offers
industry a rugged and reliable production tool at exceptional value
for money.
The TEC 6100 operates using large
43mm glue cartridges and can never run out of adhesive as a
cartridge always remains in the gun at the right temperature.
Reloading takes just seconds and is indicated by an audible and
visual signal minimizing down time. |
|
Product |
Brochure |
Details & Price |
|
TEC-6100 |
PDF Brochure |
|
|
|
|
TEC-6300 |
|
 |
The TEC
6300 is a unique, economic spray
applicator that makes hotmelt
applications affordable for everyone.
Built to a very high standard, the TEC
6300 is a totally self-contained unit,
requiring only compressed air and
electricity to operate. There are no
expensive bulk tanks or fragile heated
hoses to go wrong.
The TEC 6300 takes only 10 minutes to
warm up from cold and is fast and safe to reload using 43mm TECBOND
adhesive cartridges.
It is the highest output, hand-held
industrial hotmelt spray glue gun available, and is totally
solvent-free and non-toxic, so there are none of the environmental
problems that are often associated with other spray adhesive glue
guns. |
|
Product |
Brochure |
Details & Price |
|
TEC-6300 |
PDF Brochure |
|
|
|
|
|
|
