Never-Seez® Mariner's Choice is a heavy
duty anti-seize and extreme pressure
lubricant formulated to assure absolute
parts protection against seizure,
galling and corrosion in fresh and salt
water environments.
Mariner's Choice offers unparalleled
resistance to water washout and the best
protection in continuous high moisture
environments both above and below water
lines.
Suggested applications: Bilge
piping, screw shafts, prop shaft bearing
housings, winches, cables, and anchor
lines, porthole studs, rigging and hoist
cables, steel mills, suspension bridges,
wind turbines, offshore rigging and
other applications that are exposed to
harsh salt water and fresh water
conditions
-
Color: Black-Gray
-
Temperature Range: -22°F to
2,450°F (-30°C to 1,343°C)
-
Thickener Type: Calcium
Complex
-
Particle Size: 3.5 Mil Maximum
(75 microns)
-
Density (G/CM3): 1.31 to 1.39
-
ASTM D-92 Flash Point : >475°F
(246°C)
-
ASTM B-117 Salt
Fog Test, Hrs: 4,000
-
ASTM D-130 Copper Corrosion Test @ 212°F (100°C), 24 Hrs:
No Corrosion
-
ASTM D-217 Work Penetration, 60 Strokes @ 77°F (25°C):
260-310
-
ASTM D-217 NLGI Grade:
1/2
-
ASTM D 566/Dropping Point:
572°F (300°C)
-
Torque Coefficient (K factor):
.11
-
ASTM D-1264 Water
Washout, % loss @ 100°F: <1.00
-
ASTM D-1264 Water Washout, % loss @ 175°F: <2.75
-
ASTM D-1743
Bearing Rust Test: Pass
-
ASTM D-2596 Four Ball EP Load Wear Index: 127.3
-
ASTM D-2596 Four Ball EP Last Non-Seizure Load (scar): 100
kgf (0.45mm)
-
ASTM D-2596 Four Ball EP Last Seizure Load (scar): 620 kgf
(2.21 mm)
-
ASTM D-2596 Four Ball EP Weld Load: 800 kgf
-
ASTM D-4170 Fretting Wear @
73°F (23°C), 22 Hrs, mg loss:
7.15
|
|
