|
|
|
INDUSTRIAL
SUPPLY
GROUP |
Industrial Supply Group
Bostik and Never-Seez Anti-Seize and Lubricants, Permatex,
Weldbond & More!
We now accept
Visa, MasterCard and American Express. |
|
|
| |
|
Lubricants
|
|
Never-Seez
High Temperature Bearing Lubricant |
|
|
 |
Never-Seez High
Temperature Bearing Lubricant is an
exclusive combination of a specially
formulated high temperature grease and
lubricating enhancers that provide long
lasting lubrication at temperatures between
500°F
and 1000°F.
High Temperature Bearing Lubricant is
recommended for ball and roller bearings,
bushings, open and sealed bearings.
Suggested applications: Process
oven bearings, heat treat ovens and
furnaces, kiln ovens and casters, oven
damper controls, high temperature
exhaust fans
-
Temperature Resistance: -15°F
to 1000°F (-9°C to 538°C)
-
Particle Size: 1 mil maximum
(25 microns)
-
Density (G/CM3): .90 to .94
-
ASTM D-217 Work Penetration:
265-335
-
ASTM D-92 Flash Point : >482°F
(250°C)
-
ASTM D 566/Dropping Point:
Non-dropping
-
Torque Coefficient (K factor):
N/A
-
Coefficient of Friction/ASTM Test
Method: .0703 D-2266
-
Falex Test/Fail Load: 750 lbs
(341 Kg)
|
|
|
|
Never-Seez
Red Bearing Lubricant
|
|
|
 |
Never-Seez Red
Bearing Lubricant is a special formulation
of polyurea thickened grease and rust
inhibitors that work to provide maximum
bearing life. Superior in performance to
soap thickened grease, Red Bearing Lubricant
has 70% longer life than commercial
lubricants as well as temperature resistance
to 350ºF continuous service and 400ºF
intermittent. It also shows excellent
structural stability and maintains its
consistency better than competitive greases
under severe operating conditions such as
encountered in an over packed bearing. Red
Bearing Lubricant does not thin out in the
presence of water and resists water washout,
mild acid and alkaline solutions.
Suggested applications: High and
low speed bearings, pre-lubricated and
"seal-for-life" bearings, universal
joints, CV joints, wheel bearings, train
wheel block bearings, tunnel augering
equipment, for "quiet" bearings per
manufacturers' requirements, speed
factors (nodm) up to 400,000
-
Temperature Resistance: -30°F
to 350°F (-34°C to 177°C)
-
Particle Size: N/A
-
Density (G/CM3): .89 to .93
-
ASTM D-217 Work Penetration:
290-330
-
ASTM D-92 Flash Point: >482°F
(250°C)
-
ASTM D 566/Dropping Point:
450°F (232°C)
-
Torque Coefficient (K factor):
N/A
-
Coefficient of Friction/ASTM Test
Method: .0732 D-2265A
-
Falex Test/Fail Load: 750 lbs
(341 Kg)
|
|
|
|
Bostik TopCote® |
|
|
|
 |
TopCote®
features a unique fluoropolymer
technology that dramatically reduces
sliding friction on table saws while it
repels dust, dirt, moisture and prevents
corrosion. Its dry formula contains no
silicone or petroleum and it will never
stain wood or interfere with glues or
finishes.
TopCote forms a durable, water-repelling
dry film on saw tables and tool surfaces
to reduce sliding friction and eliminate
surface "hang ups." Compared to paste
wax, TopCote is 30% slicker, prevents
rust longer and is easier to use.
Contains no
silicone - Prevents rust 5 times longer than wax
or silicone - Lasts 3 times longer than wax.
|
|
Product |
Container Size |
Details & Price |
|
TopCote-05 |
5.5 oz. Can |
 |
|
TopCote-10 |
10.75 oz. Can |
|
|
|
|
Bostik DriCote® |
|
|
|
 |
Helps
achieve cleaner, truer cuts from any
blade or bits. It forms a clear, tough,
micro-thin coating that greatly reduces
friction and extends overall blade life.
DriCote prevents resin and pitch
build-up to save time and money on blade
cleanings and re-sharpening, while
increasing overall yield.
Use DriCote on saw blades, drills and
router bits for cleaner, straighter
cuts. It forms a tough coating on metal
surfaces to reduce cutting friction and
resin buildup.
Prevents resin and
pitch buildup - More than doubles time between
re-sharpening - Contains no silicone. |
|
Product |
Container Size |
Details & Price |
|
DriCote-05 |
5.5 oz. Can |
|
|
DriCote-10 |
10.75 oz. Can |
|
|
|
|
Bostik
Bearing Lubricant
|
|
|
|
 |
Bostik
Bearing Lubricant is Ideal for router
work on all wood and solid surfaces. It
protects valuable tools even under heavy
operating loads and high temperatures up
to 550°F.
Regular maintenance with Bearing
Lubricant can extend bearing life far
better than oil or other treatments. Use
it to free up frozen bearings and seal
bearings from moisture, too.
Reduces
operating friction by 25% - Extends
bearing life by 3 times - Effective
twice as long as oil and up to 550°F -
Contains no silicone. |
|
Product |
Container Size |
Details & Price |
|
BLube-05 |
5.5 oz. Can |
|
|
|
|
Permatex®
Ultra Slick Synthetic Multi-Purpose
Lubricant with PTFE |
|
 |
With 4
times the lubrication of ordinary
petroleum-based greases, this NLGI #2
grease withstands temperatures from
-45°F to 350°F (-42° to 177 °C), 450°F
(232°C) intermittent. Contains PTFE for
added protection against friction and
wear. Nonflammable in grease form.
Contains no ODC's. Completely
translucent product will not stain
equipment or fabric. Convenient
packaging for any size job. Aerosol
formulation allows for wicking in of
grease into hard to reach areas and
joints. The changing viscosity formula
sprays as a liquid and sets up as a
solid grease.
Suggested applications: Steering linkage
fittings, door handles, hasps, casters,
roller bearings, door and window tracks,
conveyors/ovens, drive chains, nuts &
bolts, winches, pumps, locks cables,
pulleys, hinges, open gears, drill
presses, lathes, clamps, power and hand
tools, pivot points, shackles, gear
boxes, outboard motors, table saws,
small appliance moving parts, garage
door opener mechanisms, latch
assemblies, other moving parts. |
|
Product |
Container Size |
Details & Price |
|
81944 |
14 oz. Cartridge |
|
|
|
|
Permatex®
Dielectric Tune-Up Grease |
|
 |
Provides a
moisture-proof barrier that lubricates and
protects electrical equipment from salt, dirt
and corrosion. High dielectric strength. Good
thermal, oxidation and chemical stability.
Suggested applications: Lubricating and
moisture-proofing ignition systems,
disconnect junctions, electrical
assemblies and terminals, cable
connectors and battery terminals;
maintaining flexibility of natural and
synthetic rubbers, vinyl, plastics,
rubber and plastic O-rings. |
|
Product |
Container Size |
Details & Price |
|
22058 |
3 oz. Carded Tube |
|
|
|
|
Permatex®
Hydraulic Jack Oil |
|
 |
Improves
lubrication in all types of hydraulic units.
Prevents rust and sludge buildup. Permits
hydraulic actuator to function properly in
temperatures from -49°F to 120°F (-45°C to
49°C). Maintains proper viscosity. Contains
antioxidant, anti-rust and anti-wear additives
for maximum service life. Noncorrosive formula.
Suggested applications: Load bearing
surfaces such as fifth wheels, trailer
balls, construction vehicle tracks,
sliding and oscillating plates. |
|
Product |
Container Size |
Details & Price |
|
80055 |
1 gal. Bottle |
|
|
|
|
Permatex®
- Force 109® 5-Way Spray |
|
General
purpose lubricant and penetrant quickly
removes rust and corrosion while
protecting the parts and assemblies.
De-moisturizes electrical contacts and
equipment. Seals out moisture and
lubricates moving parts.
Suggested Applications: Engine bearings,
camshafts, lifters, valves, guides and
rocker shaft assemblies. |
|
Product |
Container Size |
Details & Price |
80068 |
12 oz. Aerosol |
|
|
|
|
Permatex®
- Spray Lubricant - NFPA Fire Code 30B Level 3 |
|
Lubricates
and waterproofs all types of mechanical
equipment. Stops friction and squeaks.
High silicone formula does not attract
dust or dirt. Prevents binding, sticking
and deterioration. Non-gumming. Will not
mar paint, rubber or plastic surfaces.
Waterproofs and electrically insulates.
Suggested Applications: Precision
instruments, vending machines, motors,
dies, controls, electronic equipment,
industrial machinery, rolling and
sliding mechanisms, hinges, windows,
doors, locks, linkages, springs. |
|
Product |
Container Size |
Details & Price |
80070 |
16 oz. Aerosol |
|
|
|
|
Permatex®
- Chain Lube - NFPA Fire Code 30B Level 3 |
|
Cleans,
lubricates, extends life and protects
all types of roller chains, gears and
cables that operate under exposed
conditions. Easy-to-apply foaming action
assures effective application. Repels
dirt, sand, dust. Minimal "throw-off".
Contains no ODS's.
Suggested Applications: Chain-driven
equipment including chain, pin, roller
and brushing areas: sprockets, open
gears, wire rope, pulleys, snatch
blocks, hoists, conveyors, fork lifts,
elevators, overhead door drives, mining,
construction, earthmoving and material
handling equipment. |
|
Product |
Container Size |
Details & Price |
80075 |
6 oz. Aerosol |
Coming Soon |
|
|
|
Permatex®
- Belt Dressing & Conditioner - NFPA Fire Code
30B Level 1 |
|
Extends
belt life. Penetrates the cord fibers of
"V" belts to restore pliability and
flexibility. Prevents belt slippage due
to heat, cold, dampness, dust and
glazing. Eliminates squeaking and
slipping.
Suggested Applications: Chain-driven
equipment including chain, pin, roller
and brushing areas: sprockets, open
gears, wire rope, pulleys, snatch
blocks, hoists, conveyors, fork lifts,
elevators, overhead door drives, mining,
construction, earthmoving and material
handling equipment. |
|
Product |
Container Size |
Details & Price |
80074 |
6 oz. Aerosol |
|
80073 |
16 oz. Aerosol |
|
|
|
|
|
|
|
|
| |
|
