|
|
|
INDUSTRIAL
SUPPLY
GROUP |
Industrial Supply Group
Bostik and Never-Seez Anti-Seize and Lubricants, Permatex,
Weldbond & More!
We now accept
Visa, MasterCard and American Express. |
|
|
| |
|
Lab Metal®
Repair Putty, Solvents & Heat Block
Industrial Supply Group is a Full Line
Distributor! |
 |
|
Lab Metal®
Repair Putty
|
|
 |
Ready-to-use aluminum-filled repair and patching
compound. Spreads like paste, hardens into
metal. Adheres to metal, wood, plastic, glass,
fiberglass and more. Apply right from the can.
Can be milled, drilled, tapped, ground and
sanded smooth. Will not shrink or crack. Water
resistant, rustproof. Withstands heat to 350°F
(higher for one-time powder coating exposures).
Thin with Lab-solvent for brushing or spraying.
Durable, permanent filler for patching seams and
cracks, rebuilding worn metal surfaces,
repairing dented metal; finishing welds, filling
holes and imperfections in metal castings. May
be powder coated for single exposures up to
420°F, no longer than 20 minutes. |
|
Product |
Container Size |
Details & Price |
|
LM-6 |
6 oz. |
 |
|
LM-12 |
12 oz. |
|
|
LM-24 |
24 oz. |
|
|
LM-128 |
1 gal. |
|
|
|
|
Hi-Temp
Lab Metal®
-
Permanent Repair Compound - Withstands 1000°F |
|
 |
Hi-Temp
Lab-metal is ready-to-use right from the
can. Developed for difficult repairs
subject to excessive heat, Hi-Temp
Lab-metal withstands temperatures as
high as 1000°F. Applied with a putty
knife or similar tool. No two-component
mixing or measuring is necessary. Many
applications may be made from a single
can. After each use, to prevent Hi-Temp
Lab-metal from hardening in the can,
pour Lab-solvent over the remaining
Hi-Temp Lab-metal contents, then cover
tightly. (Stir the solvent into the
Hi-Temp Lab-metal before using again).
Lab-solvent is also used to thin Hi-Temp
Lab-metal for brush-on applications. |
|
Product |
Container Size |
Details & Price |
|
LM-HT-14 |
14 oz. |
|
|
LM-HT-24 |
24 oz. |
|
|
|
|
Lab Metal®
Solvent |
|
 |
Thinner
for Lab-metal and Hi-Temp Lab-metal, and
metal cleaner. Lab-solvent cuts grease,
oil and dirt, and is recommended as a
metal cleaner and degreaser to prepare
surfaces for Lab-metal and Hi-Temp
Lab-metal applications. Removes paint
quickly and efficiently. Lab-solvent
thins Lab-metal to paint consistency for
brushing or spraying a metallic coating.
To prevent hardening of Lab-metal and
Hi-Temp Lab-metal in the can, wet the
surface of the metal repair compound
with Lab-solvent and cover tightly after
each use. |
|
Product |
Container Size |
Details & Price |
|
LS-16 |
1 pt. |
|
|
LS-128 |
1 gal. |
|
|
|
|
Lab Metal®
Heat Block |
|
 |
Heat Block
is an insulation compound with unique
heat absorbing properties which insulate
against heat transfer during welding,
soldering, brazing or other heat
treatment. The heat absorption
properties protect closely soldered
parts, valve gasketing, thin gauge
metal, and other materials which could
be damaged during repair or installation
work. HEAT BLOCK is used to protect
plastic drain pipes in close proximity
to metal pipes being replaced or
soldered. HEAT BLOCK prevents distortion
to light gauge metals, protects rubber
and plastic components, and painted or
finished surfaces while soldering,
brazing or welding.
|
|
Product |
Container Size |
Details & Price |
|
HB-16 |
1 pt. |
|
|
HB-32 |
1 qt. |
Coming Soon |
|
|
|
|
|
|
|
| |
|
